| Komatsu Steps 561-22-63640 Steps | Preload level:7; Characteristic inner ring frequency, BPFI:14.71 Hz; D2:266.58 mm; r1a max:1 mm; db min:212 mm; Brand:SNR; da min:212 mm; Precision class:P4; Characteristic outer ring frequency, BPF0:12.29 Hz; Da max:268 mm; |
| Komatsu Steps 232-54-54911 Steps | A2:32 mm; S:15 mm; T max.:200 °C; B:38 mm; C:22.36 kN; T min.:-20 °C; A:29 mm; C0:11.5 kN; Recommended tightening torque for set screw:5.5 Nm; G:M6x1; |
| Komatsu Steps 21M-54-12681 Steps | H:54 mm; N1:23 mm; L1:60 mm; C:31.85 kN; Recommended tightening torque for set screw:8 Nm; d1:62 mm; J:146 mm; C0:20.8 kN; G:M6x1; N:17mm; |
| Komatsu Steps 426-54-12682 Steps | N1:21 mm; H:42.9 mm; N:17mm; Dz:70 mm; A1:30 mm; S:15.9 mm; L1:54 mm; Weight:1.38 kg; Designation of bearing:UC206-18G2T20; T max.:200 °C; |
| Komatsu Steps 21N-54-32321 Steps | Seals:VV (Non-Contact Rubb; Type:Bearings with Housin; Days to Ship:8 Days; Bearing Material:[Steel] Steel; Holder Surface Treatment:Not Provided; Bearing Retained:No; Bearing Part Number:6203; Number of Bearings:Double; RoHS:6; |
| Komatsu Steps 232-54-54921 Steps | Number of Bearings:Single; Bearing Retained:Yes (with retaining; Flange Shape:Compact Type; Width T(mm):22; Shape:Flange Type; Bearing Material:[Steel] Steel; Type:Bearings with Housin; RoHS:6; Bearing Used:Deep Groove Ball Bea; |
| Komatsu Steps 209-54-43950 Steps | Types:16**/6*** series; Type:Ball; B:10; Precision:Grade 0; Inner/Outer Ring Material:Steel; Load Direction:Radial; Max. Allowed rpm(rpm):8000; Grease symbol:/2AS; Size Standards:Metric System; |
| Komatsu Steps "195-15-15113 Valve seat | J:127 mm; L1:56 mm; A:60 mm; N1:21 mm; s1:30.2 mm; Recommended tightening torque for set screw:11.5 Nm; L:167 mm; G:M6x1; B:25.4 mm; H2:140 mm; |
| Komatsu Steps 209-54-77661 Steps | T min.:-40 °C; Designation of open end cover:SCOU212-38; s1:32.55 mm; A2:56.7 mm; A:48 mm; J:160 mm; C:52.5 kN; L:195 mm; Dz:120 mm; H3:135; |
| Komatsu Steps "19M-22-12570 Valve seat | H:54 mm; N1:23 mm; L1:60 mm; C:31.85 kN; Recommended tightening torque for set screw:8 Nm; d1:62 mm; J:146 mm; C0:20.8 kN; G:M6x1; N:17mm; |