| komatsu 600-825-9121 ALTERNATOR | Type:Lock Nut; Nominal Number:HLB-02; Screw Type:Metric (fine) Thread; Material:[Stainless Steel] 30; Sales Unit:Low Quantity (can be; Shape:Round shape; Thread Nominal M(mm):M15X1.0; |
| komatsu 600-825-9410 ALTERNATOR | Surface Treatment:No; B:54; RoHS:6; Days to Ship:Quote; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Fit:J7; |
| komatsu 600-825-3740 ALTERNATOR | Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Width T(mm):50; Flange O.D. H(φ):54; Type:Bearings with Housin; Holder Surface Treatment:Clear Anodize; Seals:VV (Non-Contact Rubb; Flange Shape:Square Type; |
| komatsu 600-825-6330 ALTERNATOR | S:16.7 mm; J:80 mm; s1:33.35 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; d:23.81 mm; Weight:1.13 kg; B1:46.8 mm; N:16mm; C:22.36 kN; |
| komatsu 600-825-6371 ALTERNATOR | Bearing I.D. d(mm):12; Bearing Part Number:6901; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Number of Bearings:Double; Shape:Flange Type; Width T(mm):25 ～ 60; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; |
| komatsu 600-825-6371 ALTERNATOR | S:16.7 mm; J:80 mm; s1:33.35 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; d:23.81 mm; Weight:1.13 kg; B1:46.8 mm; N:16mm; C:22.36 kN; |
| komatsu 21K-01-B2610 ALTERNATOR | S:16.7 mm; J:80 mm; s1:33.35 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; d:23.81 mm; Weight:1.13 kg; B1:46.8 mm; N:16mm; C:22.36 kN; |
| komatsu 600-825-5151 ALTERNATOR | Designation of open end cover:SCOU208-24; C0:18.2 kN; L:184 mm; N1:23 mm; Z:69 mm; H2:100 mm; A:54 mm; H:49.2 mm; s1:24.6 mm; N:17mm; |
| komatsu 600-821-9980 ALTERNATOR | Min operating temperature, Tmin:-40 °C; Nlim (oil):1,800 rpm; Brand:NTN; Category:Roller Bearings; e:0.41; Rating life coefficient, A2:1.4; B:66.68 mm; Characteristic rolling element frequency, BSF:8.42 Hz; Inventory:0.0; Static load, C0:910 kN; |
| komatsu 600-821-3280 ALTERNATOR | Surface Treatment:No; B:54; RoHS:6; Days to Ship:Quote; Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Seal:Nitrile; Fit:J7; |