| komatsu 600-825-6371 ALTERNATOR | Bearing I.D. d(mm):12; Bearing Part Number:6901; Bearing Used:Deep Groove Ball Bea; Days to Ship:7 Days; Number of Bearings:Double; Shape:Flange Type; Width T(mm):25 ～ 60; Type:Bearings with Housin; Seals:VV (Non-Contact Rubb; |
| komatsu 600-825-9711 ALTERNATOR | Type:Lock Nut; Nominal Number:HLB-02; Screw Type:Metric (fine) Thread; Material:[Stainless Steel] 30; Sales Unit:Low Quantity (can be; Shape:Round shape; Thread Nominal M(mm):M15X1.0; |
| komatsu 600-825-6540 ALTERNATOR | Min operating temperature, Tmin:-40 °C; Nlim (oil):1,800 rpm; Brand:NTN; Category:Roller Bearings; e:0.41; Rating life coefficient, A2:1.4; B:66.68 mm; Characteristic rolling element frequency, BSF:8.42 Hz; Inventory:0.0; Static load, C0:910 kN; |
| komatsu 600-825-6371 ALTERNATOR | A1:4 mm; T max.:200 °C; C:14 kN; T min.:-20 °C; L:71 mm; d:25 mm; B:27 mm; H:95.2 mm; A2:19.5 mm; J:76.2 mm; |
| komatsu 600-821-9830 ALTERNATOR | Inner Race Width:0 Inch | 0 Millimete; Long Description:20MM Bore; 47MM Outs; Min operating temperature, Tmin:-20 °C; Maximum Capacity / Filling Slot:No; Characteristic outer ring frequency, BPF0:3.08 Hz; Characteristic inner ring frequency, BPFI:4.92 Hz; d:20 mm; B:14 mm; da min:25 mm; Product Group:B00308; |
| komatsu 600-821-8950 ALTERNATOR | A1:4 mm; T max.:200 °C; C:14 kN; T min.:-20 °C; L:71 mm; d:25 mm; B:27 mm; H:95.2 mm; A2:19.5 mm; J:76.2 mm; |
| komatsu 600-825-6130 ALTERNATOR | Min operating temperature, Tmin:-40 °C; Nlim (oil):1,800 rpm; Brand:NTN; Category:Roller Bearings; e:0.41; Rating life coefficient, A2:1.4; B:66.68 mm; Characteristic rolling element frequency, BSF:8.42 Hz; Inventory:0.0; Static load, C0:910 kN; |
| komatsu 600-825-6510 ALTERNATOR | ra max:0.3 mm; rNs min:0.3 mm; Ca max:3.18 mm; D:35 mm; Brand:NTN; B:10 mm; rNa max:0.3 mm; Static load, C0:3.35 kN; Fatigue limit load, Cu:0.15 kN; a min:1.9 mm; |
| komatsu 600-861-8120 ALTERNATOR | Bearing Part Number:6004; Width T(mm):60; Bearing I.D. d(mm):20; Type:Bearings with Housin; Flange Shape:Square Type; Shape:Flanged Pilot Type; Holder Surface Treatment:Electroless Nickel P; Days to Ship:7 Days; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; |
| komatsu 600-825-9731 ALTERNATOR | S:16.7 mm; J:80 mm; s1:33.35 mm; Recommended tightening torque for set screw:8 Nm; G:M6x1; d:23.81 mm; Weight:1.13 kg; B1:46.8 mm; N:16mm; C:22.36 kN; |