Komatsu handle 14X-977-2521 HANDLE	Weight:2.38 kg; A1:16 mm; S:19 mm; N1:19 mm; SW:3.97 mm; s1:24.6 mm; T max.:100 °C; L:144 mm; C:31.85 kN; A:49 mm;
Komatsu handle 195-979-1410 HANDLE	Inner/Outer Ring Material:[Steel] Steel; Basic Dynamic Load Rating(N):39500; Preload Mark:C3; Internal Symbol:No; Special Configurations Code:No; Outer Ring:With Outer Ring; Load Direction:Radial; Material Symbol:No; Max. Allowed rpm(rpm):5600; Type:Ball;
Komatsu handle 11Y-874-1720 HANDLE	Inner/Outer Ring Material:[Steel] Steel; Basic Dynamic Load Rating(N):39500; Preload Mark:C3; Internal Symbol:No; Special Configurations Code:No; Outer Ring:With Outer Ring; Load Direction:Radial; Material Symbol:No; Max. Allowed rpm(rpm):5600; Type:Ball;
Komatsu handle 46B-ERF-1320UEKF HANDLE	Shape:T-Shaped; Bearing Part Number:6901; Seals:DD (Contact Rubber S; Type:Bearings with Housin; Number of Bearings:Single; Bearing Retained:Yes (with retaining; C Chamfered:Provided; Bearing I.D. d(mm):12; Width T(mm):12;
Komatsu handle 10S-54-21162 HANDLE	Da max:100 mm; Nlim (grease):6,100 rpm; Fatigue limit load, Cu:1.03 kN; Characteristic outer ring frequency, BPF0:8.13 Hz; f0:16.5; Characteristic rolling element frequency, BSF:10.21 Hz; rs min:1 mm; Static load, C0:22.6 kN; Dynamic load, C:24.4 kN; D:105 mm;
Komatsu handle 134-54-67520 HANDLE	e:0.29; rs min:1.1 mm; Characteristic rolling element frequency, BSF:7.17 Hz; Fatigue limit load, Cu:1.91 kN; Y2:3.41; ra max:1 mm; Mass:0.57 kg; D1:77 mm; Nref:7,400 rpm; da min:56.5 mm;
Komatsu handle 14X-54-33254 HANDLE	Da max:257 mm; Fatigue limit load, Cu:69.3 kN; Inventory:0.0; da min:163 mm; d1:193 mm; E:238 mm; Minimum Buy Quantity:N/A; Min operating temperature, Tmin:-40 °C; Weight / Kilogram:17.9; d:150 mm;
Komatsu handle 14X-54-33251 HANDLE	e:0.29; rs min:1.1 mm; Characteristic rolling element frequency, BSF:7.17 Hz; Fatigue limit load, Cu:1.91 kN; Y2:3.41; ra max:1 mm; Mass:0.57 kg; D1:77 mm; Nref:7,400 rpm; da min:56.5 mm;
Komatsu handle 22F-959-1411 HANDLE	Number of Bearings:Double; Bearing I.D. d(mm):15; Type:Bearings with Housin; Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel; Flange O.D. H(φ):50; Bearing Retained:No;
Komatsu handle 20Y-54-35932KZ HANDLEA	e:0.29; rs min:1.1 mm; Characteristic rolling element frequency, BSF:7.17 Hz; Fatigue limit load, Cu:1.91 kN; Y2:3.41; ra max:1 mm; Mass:0.57 kg; D1:77 mm; Nref:7,400 rpm; da min:56.5 mm;