Komatsu valve "	Basic Load Rating, Dynamic Rating(kN):22.8; Category:Roller Follower; Seal:No Seal; Shaft:No; Roller Guiding Method:Holder Mounted; Roller O.D. D(Ø):52; Roller Width B(mm):25; d:25; Roller Follower Type:Non-Separable Type; Unit:[Metric Series] Metr;
Komatsu valve "	Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; A:70 mm; T max.:100 °C; H:100 mm; Designation of housing:PH208-; J:137 mm; A1:34 mm; d:38.1 mm; s1:39.7 mm;
Komatsu valve "235-61-13501 valve	Basic Dynamic Load Rating(N):125000; D:150; Outer Ring Shape:Flat; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Load Direction:Radial / Thrust; Number of Raceway Ring Rows:Single Row; Retainer Type:Momi removing; Size Standards:Metric System;
Komatsu valve "708-1W-03680 valve	Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3;
Komatsu valve "723-46-47500 valve	Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; A:70 mm; T max.:100 °C; H:100 mm; Designation of housing:PH208-; J:137 mm; A1:34 mm; d:38.1 mm; s1:39.7 mm;
Komatsu valve "708-2L-06682 valve	B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4;
Komatsu valve "702-16-01682 beforeGuide valve	Weight:2.14 kg; B:37.6 mm; B1:51.1 mm; A5:18.8 mm; G:R1/8"; L:274 mm; s1:36.3 mm; Designation of housing:SP206-207/72-; A:21 mm; H2:41 mm;
Komatsu valve "	Outer Ring:With Outer Ring; D:24; Raceway Ring Shape:Needle Roller; Specifications/Environment:Standard; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Basic Load Rating, Dynamic Rating(N):12400; Revolution Frequency(rpm):10000;
Komatsu valve "	Weight:2.14 kg; B:37.6 mm; B1:51.1 mm; A5:18.8 mm; G:R1/8"; L:274 mm; s1:36.3 mm; Designation of housing:SP206-207/72-; A:21 mm; H2:41 mm;
Komatsu valve "702-77-02120 valve	T min.:-20 °C; d:31.75 mm; S:17.5 mm; Designation of bearing:UC207-20G2; G:R1/8"; T max.:100 °C; J:92 mm; L:118 mm; Recommended tightening torque for set screw:8 Nm; A:36 mm;