| Komatsu valve " | G:M6x1; e:22 mm; A:38 mm; A1:16 mm; T max.:200 °C; J:148 mm; N:19mm; Weight:1.97 kg; C:31.85 kN; Designation of open end cover:SCOE209-45; |
| Komatsu valve "714-12-16330 valve | Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Type:Bearings with Housin; RoHS:6; Flange O.D. H(φ):77; Volume Discount:Available; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); |
| Komatsu valve " | Basic Load Rating, Dynamic Rating(kN):22.8; Category:Roller Follower; Seal:No Seal; Shaft:No; Roller Guiding Method:Holder Mounted; Roller O.D. D(Ø):52; Roller Width B(mm):25; d:25; Roller Follower Type:Non-Separable Type; Unit:[Metric Series] Metr; |
| Komatsu valve " | Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3; |
| Komatsu valve "723-60-23501 Check valve | B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4; |
| Komatsu valve " | H1:102 mm; A:49 mm; B:49.2 mm; A2:35 mm; s1:24.6 mm; H:117 mm; L3:83 mm; L:144 mm; N2:49 mm; N1:19 mm; |
| Komatsu valve "723-40-93900 Relief valve | B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4; |
| Komatsu valve " | Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3; |
| Komatsu valve " | Combination symbol:No; Inner/Outer Ring Material:Steel; Outer Ring:With Outer Ring; Material Symbol:No; Size Standards:Metric System; Basic Load Rating, Static Rating(N):27400; Format:Standard; Load Direction:Radial; Clearance sign:No; |
| Komatsu valve " | Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; A:70 mm; T max.:100 °C; H:100 mm; Designation of housing:PH208-; J:137 mm; A1:34 mm; d:38.1 mm; s1:39.7 mm; |