| Komatsu valve " | Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; A:70 mm; T max.:100 °C; H:100 mm; Designation of housing:PH208-; J:137 mm; A1:34 mm; d:38.1 mm; s1:39.7 mm; |
| Komatsu valve " | Load Direction:Radial / Thrust; D:140; Specifications/Environment:Standard; d:90; Raceway Ring Shape:Tapered Roller; Number of Raceway Ring Rows:Single Row; B:39; Outer Ring Type:Flat; Rolling Element Material:Steel; |
| Komatsu valve "561-35-61601 valve | Basic Load Rating, Dynamic Rating(kN):22.8; Category:Roller Follower; Seal:No Seal; Shaft:No; Roller Guiding Method:Holder Mounted; Roller O.D. D(Ø):52; Roller Width B(mm):25; d:25; Roller Follower Type:Non-Separable Type; Unit:[Metric Series] Metr; |
| Komatsu valve " | Specifications/Environment:Standard; D:62; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Single Row; Outer Ring Type:Flat; d:30; Raceway Ring Shape:Tapered Roller; Revolution Frequency(rpm):6300; |
| Komatsu valve " | G:M6x1; e:22 mm; A:38 mm; A1:16 mm; T max.:200 °C; J:148 mm; N:19mm; Weight:1.97 kg; C:31.85 kN; Designation of open end cover:SCOE209-45; |
| Komatsu valve "421-35-11201 valve | Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Type:Bearings with Housin; RoHS:6; Flange O.D. H(φ):77; Volume Discount:Available; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); |
| Komatsu valve " | B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4; |
| Komatsu valve "426-S33-1880 valve | H1:102 mm; A:49 mm; B:49.2 mm; A2:35 mm; s1:24.6 mm; H:117 mm; L3:83 mm; L:144 mm; N2:49 mm; N1:19 mm; |
| Komatsu valve "195-40-11510 Slide valve | T min.:-20 °C; d:31.75 mm; S:17.5 mm; Designation of bearing:UC207-20G2; G:R1/8"; T max.:100 °C; J:92 mm; L:118 mm; Recommended tightening torque for set screw:8 Nm; A:36 mm; |
| Komatsu valve "709-14-11850 Lifting valve | J:85 mm; C0:20.8 kN; A:54 mm; N:M12; L1:40 mm; Designation of bearing:UC209G2L3; E:22 mm; B:49.2 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |