| Komatsu valve " | J:85 mm; C0:20.8 kN; A:54 mm; N:M12; L1:40 mm; Designation of bearing:UC209G2L3; E:22 mm; B:49.2 mm; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm; |
| Komatsu valve "723-90-66900 Relief valve | Basic Load Rating, Dynamic Rating(kN):22.8; Category:Roller Follower; Seal:No Seal; Shaft:No; Roller Guiding Method:Holder Mounted; Roller O.D. D(Ø):52; Roller Width B(mm):25; d:25; Roller Follower Type:Non-Separable Type; Unit:[Metric Series] Metr; |
| Komatsu valve "15653020SK Valve sleeve | Weight:2.14 kg; B:37.6 mm; B1:51.1 mm; A5:18.8 mm; G:R1/8"; L:274 mm; s1:36.3 mm; Designation of housing:SP206-207/72-; A:21 mm; H2:41 mm; |
| Komatsu valve " | Specifications/Environment:Standard; D:62; Inner/Outer Ring Material:Steel; Number of Raceway Ring Rows:Single Row; Outer Ring Type:Flat; d:30; Raceway Ring Shape:Tapered Roller; Revolution Frequency(rpm):6300; |
| Komatsu valve " | Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3; |
| Komatsu valve " | Outer Ring:With Outer Ring; D:24; Raceway Ring Shape:Needle Roller; Specifications/Environment:Standard; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Basic Load Rating, Dynamic Rating(N):12400; Revolution Frequency(rpm):10000; |
| Komatsu valve "208-60-51411 Lifting valve | Outer Ring:With Outer Ring; D:24; Raceway Ring Shape:Needle Roller; Specifications/Environment:Standard; Outer Ring Type:Flat; Inner/Outer Ring Material:Steel; Basic Load Rating, Dynamic Rating(N):12400; Revolution Frequency(rpm):10000; |
| Komatsu valve "702-16-01150 Guide valve | Basic Dynamic Load Rating(N):125000; D:150; Outer Ring Shape:Flat; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Load Direction:Radial / Thrust; Number of Raceway Ring Rows:Single Row; Retainer Type:Momi removing; Size Standards:Metric System; |
| Komatsu valve "711-67-16620 Slide valve | Recommended tightening torque for set screw:8 Nm; C0:18.2 kN; A:70 mm; T max.:100 °C; H:100 mm; Designation of housing:PH208-; J:137 mm; A1:34 mm; d:38.1 mm; s1:39.7 mm; |
| Komatsu valve "203-973-3820 Slide valve | Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Type:Bearings with Housin; RoHS:6; Flange O.D. H(φ):77; Volume Discount:Available; Housing Material:1045 Carbon Steel; Shape:Flanged Pilot Type; Seals:ZZ (Double Shield); |