Komatsu valve "561-15-75600 valve | H1:102 mm; A:49 mm; B:49.2 mm; A2:35 mm; s1:24.6 mm; H:117 mm; L3:83 mm; L:144 mm; N2:49 mm; N1:19 mm; |
Komatsu valve "561-60-82100 valve | G:M6x1; e:22 mm; A:38 mm; A1:16 mm; T max.:200 °C; J:148 mm; N:19mm; Weight:1.97 kg; C:31.85 kN; Designation of open end cover:SCOE209-45; |
Komatsu valve " | Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3; |
Komatsu valve " | Noun:Bearing; da min:61.5 mm; D:90 mm; Static load, C0:21.2 kN; Nlim (grease):7,700 rpm; Manufacturer Name:NTN; Min operating temperature, Tmin:-60 °C; Characteristic inner ring frequency, BPFI:7.42 Hz; Outside Diameter:3.543 Inch | 90 Mill; f0:15.3; |
Komatsu valve " | Load Direction:Radial / Thrust; D:140; Specifications/Environment:Standard; d:90; Raceway Ring Shape:Tapered Roller; Number of Raceway Ring Rows:Single Row; B:39; Outer Ring Type:Flat; Rolling Element Material:Steel; |
Komatsu valve "20Y-970-5300ST valve | B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4; |
Komatsu valve " | H1:102 mm; A:49 mm; B:49.2 mm; A2:35 mm; s1:24.6 mm; H:117 mm; L3:83 mm; L:144 mm; N2:49 mm; N1:19 mm; |
Komatsu valve "723-60-23501 Check valve | B1:43.5 mm; L1:18 mm; B:34 mm; Weight:0.52 kg; Designation of housing:PAE204-; J:50.8 mm; d1:32.4 mm; G:R1/8"; d:20 mm; Designation of bearing:EX204G2L4; |
Komatsu valve " | Basic Load Rating, Dynamic Rating(kN):22.8; Category:Roller Follower; Seal:No Seal; Shaft:No; Roller Guiding Method:Holder Mounted; Roller O.D. D(Ø):52; Roller Width B(mm):25; d:25; Roller Follower Type:Non-Separable Type; Unit:[Metric Series] Metr; |
Komatsu valve "423-43-47103 Brake valve | T min.:-20 °C; d:31.75 mm; S:17.5 mm; Designation of bearing:UC207-20G2; G:R1/8"; T max.:100 °C; J:92 mm; L:118 mm; Recommended tightening torque for set screw:8 Nm; A:36 mm; |