| komatsu 273-54-62210 CUSHION | G:M6x1; Recommended tightening torque for set screw:16.8 Nm; A:50 mm; Dz:132 mm; T min.:-20 °C; Designation of bearing:UC213-40G2; e:30 mm; S:25.4 mm; C:57.2 kN; L:187 mm; |
| komatsu 273-70-11730 CUSHION | Max operating temperature, Tmax:120 °C; Inventory:0.0; Minimum Buy Quantity:N/A; Weight / Kilogram:0.697; Category:Roller Bearings; EAN:4547359067606; Bearing ring (outer ring) GS mass:0.75 kg; B:9.5 mm; Brand:NTN; D:180 mm; |
| komatsu 198-54-74950 CUSHION | H1:20 mm; T min.:-40 °C; H:47.6 mm; C0:15.2 kN; B:32 mm; Designation of housing:PG207N-; J:68 mm; Designation of bearing:US207-22G2T04; E:22 mm; A1:27 mm; |
| komatsu 423-57-11730 CUSHION | Z:44 mm; L:140 mm; A2:68.7 mm; Weight:4.23 kg; Recommended tightening torque for set screw:22 Nm; S:25.4 mm; e:29 mm; J1:92 mm; G:M6x1; T min.:-20 °C; |
| komatsu 198-54-75620 CUSHION | C:25.7 kN; B:42.9 mm; N2:37 mm; Designation of bearing:UC207-23G2L3; S:17.5 mm; N:22mm; Recommended tightening torque for set screw:8 Nm; N1:16 mm; s1:21.45 mm; SW:3.97 mm; |
| komatsu 20Y-57-C1130 CUSHION | C:25.7 kN; B:42.9 mm; N2:37 mm; Designation of bearing:UC207-23G2L3; S:17.5 mm; N:22mm; Recommended tightening torque for set screw:8 Nm; N1:16 mm; s1:21.45 mm; SW:3.97 mm; |
| komatsu 198-54-74942 CUSHION | Z:44 mm; L:140 mm; A2:68.7 mm; Weight:4.23 kg; Recommended tightening torque for set screw:22 Nm; S:25.4 mm; e:29 mm; J1:92 mm; G:M6x1; T min.:-20 °C; |
| komatsu 232-957-6620 CUSHION | Y0:0.75; Nlim (grease):630 rpm; Fatigue limit load, Cu:183 kN; D:460 mm; Mass:34.9 kg; ISO 355 reference:T4FD340; da max:362 mm; a:90.5 mm; C:57 mm; d:340 mm; |
| komatsu 21Y-70-23160 CUSHION | B:88.9; Diameter series symbol:Medium Load; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; Pillow Type, Category:Standard; Bearing Inner Dia. Shape:Tapered hole adapter; Grease Type:SH44M; Surface Treatment:No; |
| komatsu 21M-53-51110 CUSHION | Basic Load Rating, Dynamic Rating(N):360000; Cylinder shape (suffix symbol: X):No; Rolling Element Material:Steel; Outer ring oil hole:M (with fitting nozz; B:50; Large-capacity type:Standard; Specifications:S (Special Configura; d:110; Combination of two pieces:Standard; |