Komatsu Padding MY275-2111 Padding	Recommended tightening torque for set screw:33 Nm; Designation of housing:FL214-; d:70 mm; Weight:5.35 kg; N:23mm; J:216 mm; A1:20 mm; e:31 mm; L:160 mm; C:62 kN;
Komatsu Padding 21W-70-25380 Padding	ra max:1.5 mm; Max operating temperature, Tmax:110 °C; Radial clearance class:CM; Nlim (grease):8,800 rpm; Characteristic rolling element frequency, BSF:4.03 Hz; Fatigue limit load, Cu:0.87 kN; Da max:72 mm; Brand:NTN; f0:13.1; Min operating temperature, Tmin:-25 °C;
Komatsu Padding 423-33-05130 Padding Assembly	Number of Bearings:Single; Holder Surface Treatment:Electroless Nickel P; Bearing Part Number:605; Type:Bearings with Housin; Shape:L-Shaped; Seals:DD (Contact Rubber S; Bearing I.D. d(mm):5; Height H(mm):15 ～ 25;
Komatsu Padding 425-54-16332 Padding	T max.:100 °C; H:161 mm; T min.:-20 °C; S:18.8 mm; B1:51.1 mm; L1:82 mm; A1:16 mm; G:M6x1; A:34 mm; s1:36.3 mm;
Komatsu Padding 423-926-2350 Padding	Rolling Element Material:Steel; Specifications/Environment:Standard; Load Direction:Thrust; Revolution Frequency(rpm):750; Inner/Outer Ring Material:Steel; Basic Load Rating, Dynamic Rating(N):53500;
Komatsu Padding 56B-74-11410 Padding	Da max:249 mm; Nlim (oil):2,800 rpm; ra max:2 mm; Snap Ring:No; Min operating temperature, Tmin:-60 °C; Precision Class:ABEC 1 | ISO P0; Static load, C0:172 kN; Maximum Capacity / Filling Slot:No; Inventory:0.0; Dynamic load, C:168 kN;
Komatsu Padding 567-32-05111 Padding Assembly	Bearing Ring Type:NF Type; Inner/Outer Ring Material:Steel; Special Configurations Code:No; RoHS:6; Low Torque Specification:No; Precision (JIS):Grade 0; Symbol of contact angle:No; Holder Symbol:M; Material Symbol:No; Load Direction:Radial;
Komatsu Padding 425-54-15481 Padding	Weight:7.4 kg; C0:60.5 kN; A2:78 mm; N:31mm; J:240 mm; T min.:-20 °C; Designation of housing:FL313-; Designation of bearing:UC313-40G2; L:175 mm; d:63.5 mm;
Komatsu Padding 421-56-21440 Padding	Weight:7.4 kg; C0:60.5 kN; A2:78 mm; N:31mm; J:240 mm; T min.:-20 °C; Designation of housing:FL313-; Designation of bearing:UC313-40G2; L:175 mm; d:63.5 mm;
Komatsu Padding 421-925-1160 Padding	S:11 mm; s1:33.4 mm; N:14mm; L:130 mm; Recommended tightening torque for set screw:8 Nm; B:30.2 mm; A:39.5 mm; G:R1/8"; C:29.6 kN; C0:18.2 kN;